Addition Of Oil Research Articles

Seedling Emergence and Growth Can Be Improved by Char Carbon Created During Thermal Treatment of Petroleum-Impacted Soils

ABSTRACT Thermal treatment of soils to remove petroleum hydrocarbons alters soil properties in ways that limit germination potential for plants used in revegetation efforts. However, recent studies have shown that a char material with the potential to offset fertility-reducing effects is produced by the pyrolysis of hydrocarbons during treatment. In this study, seedling emergence and growth (14 days) of two plant species, soybean (Glycine max) and oat (Avena sativa), were evaluated in four soils of contrasting properties treated with 5% (by mass) oil addition and two levels of salt addition. Three temperatures (300, 425, and 550°C) of thermal desorption (TD) and one smolder remediation approach were employed to remove the oil prior to planting. Results indicate that seedling response to temperature of thermal treatment and salt addition is dependent both upon plant species and soil properties. Higher temperatures were necessary to remove crude oil to levels low enough to allow germination. The smoldering approach did not remove enough oil to allow germination. This is the first study to show that early shoot mass and root mass are improved following TD treatment compared with an untreated control under certain conditions. The outcomes will be valuable for designing TD treatments when revegetation is the goal.

Nanotechnology in Lubricants: A Systematic Review of the Use of Nanoparticles to Reduce the Friction Coefficient

The study of lubricating oil is paramount for the optimal functioning of modern engines, and it has generated intensive research in the automotive industry. The aim is to improve the tribological properties of lubricants by including nanomaterials as additives in base oils. This article presents an exhaustive bibliographic review of the experiments carried out to optimize the tribological properties of nano-lubricants in order to identify the nanoparticles and experimental processes used and analyze the results obtained. The methodology adopted combines inductive and deductive elements. It begins with the formulation of a general theory on the application of nanoparticles in lubricants, followed by the collection of specific data on the conceptualization and preparation of nano-lubricants. A total of 176 articles focused on the application of nanoparticles in lubricants, especially to reduce the coefficient of friction, are reviewed. These works, with impact levels Q1 and Q2, delve into the application and are analyzed to review the obtained results. Most researchers worked with a nanoparticle concentration range of 0% to 1% by volume.

Synergistic Effect of Acrylate of Dialkyl Dithiophosphoric Acid Combined with Molybdenum Dialkyl Dithiocarbamate as Additives in Gear Oil

With the aim of improving the tribological properties of low-viscosity gear oil for automobiles, an acrylate of dialkyl dithiophosphoric acid (ADDP) with strong polar groups was synthesized. The tribological behavior of ADDP combined with molybdenum dialkyl dithiocarbamate (MoDTC) in gear oil was systematically studied. Tribological performances of gear oil containing different additives were assessed using a four-ball friction and wear tester. The obtained tribological characteristics reveal that ADDP and MoDTC can significantly improve the antiwear and antifriction performance of low-viscosity gear oil. Moreover, compared with using MoDTC or ADDP alone, the average friction coefficient and wear scar diameter of ADDP combined with MoDTC further decreased by 2.41–19.15% and 5.00–18.19%, respectively. Analysis of the worn surface showed that the structural characteristics and physical synergistic lubricating actions of the ADDP with MoDTC additives during the friction process can contribute to the exceptional tribological properties of the hybrid additives.

A Comprehensive Review on Tribological Behaviour of Hybrid Nanocellulose-CuO as Nanolubricant for Piston Ring Cylinder Liner Application

Friction coefficient and wear rate are crucial performance for the development of nanolubricants, which are of great significance for realizing energy conservation and prolonging service life of mechanical components. Herein, this review systematically describes the progress on nanocellulose (CNC) and Copper (II) oxide (CuO) as effective nanoparticles for developments of nanolubricant as oil additives for improving the anti-friction and wear resistant for piston ring-cylinder liner contact. Additionally, we point out several problems existing in the applications of CuO and CNC additives propose the possible solutions. Finally, the research prospects of CNC-CuO in the field of tribology are prospected.

PSV-4 Exposure to prenatal tributyrin improved pre-weaning growth performance and reduced fat deposition in the muscle of market age pigs

Abstract Organic acids, including short chain fatty acids, medium chain fatty acids, and tricarboxylic acid, are used as alternatives to antibiotics for the purpose of growth promotion in livestock species. Butyric acid has been used extensively for its various functions in intestinal health and barrier function, as well as its actions as a histone deacetylase inhibitor. Many of the issues relating to using butyric acid as a feed supplement are overcome by utilizing tributyrin (TB), a butyrate prodrug. Dietary supplementation of TB to sows during gestation was able to improve pre-weaning litter performance. Sows (n = 52, 42 gestational days) were randomly assigned to either a control diet or control diet supplemented with 2% TB. All diets were made isocaloric with the addition of oil and wheat flour. Dietary treatments continued until 112 d of gestation. After farrowing, piglet growth performance was monitored. Once offspring reached 6 mo of age, 30 gilts from the most median performing litters were identified for tissue collection and evaluation of meat characteristics. Sows that received tributyrin during gestation tended to have greater total litter weights at birth (P < 0.1); however, average individual birthweights were not statistically different between control and TB litters. The TB piglets tended to be heavier at weaning (P < 0.1). Pre-weaning average daily gains were higher in piglets exposed to prenatal TB (P < 0.01). Body weights and hot carcass weights did not differ significantly in gilts at market age. There was, however, a trend of increased dressing percentage from TB treated offspring, accompanied by significantly reduced back fat at the 10th rib (P < 0.1 and P < 0.05 respectively). These data suggest that TB supplementation results in both temporary and permanent improvements to growth and development. This study provides further evidence that prenatal TB can have long term effects on muscle growth and meat quality. Further studies are needed to ultimately determine whether prenatal or postnatal supplementation is ideal for improving long-term growth performance.

Assessing the efficiency of UAV for pesticide application in disease management of peanut crop.

Effective utilization of plant protection UAVs in peanut cultivation management necessitates a comprehensive grasp of how application volume rates and pesticides influence peanut leaf spot and rust control. This study aimed to compare the effects of application volume rates and pesticides on droplet deposition, disease, leaf retention rate, and peanut yield. A T20 plant protection UAV sprayer was used to apply four various pesticide doses. In comparison, a knapsack sprayer was used to spray with an application volume rate of 450 L/ha. The results showed a significant difference in droplet deposition between the plant protection UAVs and the electric knapsack sprayer. In the pesticide treatment with an application volume rate of 15.0 L/ha, there was no significant difference in the deposition on the peanut canopy of each pesticide treatment, but there was a significant difference in the deposition on the ground in the treatment with adding vegetable oil adjuvant. The treatment with added vegetable oil additives showed the worst performance. The treatment with a spray volume of 22.5 L/ha showed the best performance, with only the leaf spot control effect being 0.3 percentage points lower than that of the electric knapsack sprayer. Plant protection UAV spraying is feasible to control peanut diseases. Considering the operational effectiveness of the plant protection UAV and application volume rate, it is recommended to use a spray volume of 22.5 L/ha without adding vegetable oil adjuvants for field operations. This article is protected by copyright. All rights reserved.

Production, characterization, and application of Pseudoxanthomonas taiwanensis biosurfactant: a green chemical for microbial enhanced oil recovery (MEOR)

Biosurfactants, as microbial bioproducts, have significant potential in the field of microbial enhanced oil recovery (MEOR). Biosurfactants are microbial bioproducts with the potential to reduce the interfacial tension (IFT) between crude oil and water, thus enhancing oil recovery. This study aims to investigate the production and characterization of biosurfactants and evaluate their effectiveness in increasing oil recovery. Pseudoxanthomonas taiwanensis was cultured on SMSS medium to produce biosurfactants. Crude oil was found to be the most effective carbon source for biosurfactant production. The biosurfactants exhibited comparable activity to sodium dodecyl sulfate (SDS) at a concentration of 400 ppm in reducing IFT. It was characterized as glycolipids, showing stability in emulsions at high temperatures (up to 120 °C), pH levels ranging from 3 to 9, and NaCl concentrations up to 10% (w/v). Response surface methodology revealed the optimized conditions for the most stable biosurfactants (pH 7, temperature of 40 °C, and salinity of 2%), resulting in an EI24 value of 64.45%. Experimental evaluations included sand pack column and core flooding studies, which demonstrated additional oil recovery of 36.04% and 12.92%, respectively. These results indicate the potential application of P. taiwanensis biosurfactants as sustainable and environmentally friendly approaches to enhance oil recovery in MEOR processes.

Nanoencapsulation of Oliveria decumbens Vent./basil essential oils into gum arabic/maltodextrin: Improved in vitro bioaccessibility and minced beef meat safety

This study investigated the functional properties of freeze-dried encapsulated Oliveria decumbens Vent. (OEO) and basil (BEO) essential oils (EOs) in maltodextrin/gum arabic coating solution (1:1). Nanoencapsulated EOs were evaluated in terms of size, polydispersity, encapsulation efficiency, morphology, antioxidant, and antibacterial activities (AOA and ABA), and sensory characteristics in vitro compared to the control. The TPC (30.43 to 32.41 mg GAE/g DW) and AOA (25.97 to 26.42 %) were determined in free and encapsulated OEO, and ABA was observed, which were higher than BEO. Both free and encapsulated OEO and BEO demonstrated significant ABA against various Gram-positive and Gram-negative bacteria, with MIC values ranging from 0.25 to 1.25 mg/mL and MBC values ranging from 1.00 to 3.00 mg/mL. In minced meat, both free and encapsulated oils effectively reduced bacterial counts during refrigerated storage, with log reductions ranging from 1.00 to 6.48 CFU/g. Additionally, the pH and thiobarbituric acid values in meat samples were better maintained with the addition of oils. Sensory analysis showed that the encapsulated oils effectively masked their natural flavor and aroma, making them suitable for incorporation into food. Finally, OEO and BEO nanocapsules can improve the standard and safety of meat products due to their antioxidant and antibacterial properties.

Effect of additive combinations on tribofilm formation in fully formulated 0W‐8 oil

Reducing engine oil viscosity is an effective way to meet automotive fuel efficiency requirements. Clarifying the effects of multiple coexisting additives in low-viscosity oil is important for the development of low-viscosity engine oil. In this study, six kinds of 0W‐8 engine oil, including those without a Ca-derived detergent, a dispersant or molybdenum dialkyldithiocarbamate (MoDTC), were selected to study the effects of these additives on the tribofilm formation and the friction characteristics of fully formulated low-viscosity oil. A custom-made rolling and sliding tribometer was used to evaluate the tribological properties and form the tribofilms. The elemental distribution of the tribofilms was characterized by electron probe microanalysis (EPMA), and the chemical compositions of the films were determined using X-ray photoelectron spectroscopy (XPS). The Ca-derived detergent hindered both the ZnDTP-derived and MoDTC-derived tribofilm formation in the fully formulated low-viscosity oil due to adsorption competition. The effect of the ashless dispersants on the ZnDTP-derived tribofilm formation in the fully formulated 0W‐8 oil showed opposite results in the presence or absence of MoDTC. The addition of MoDTC had different effects on the ZnDTP-derived tribofilm formation under different additive combinations.

Evaluation of the effect of active essential oil components added to pickled-based marinade on beef stored under vacuum packaging: Insight into physicochemical and microbiological quality

Evaluation of the effect of active essential oil components added to pickled-based marinade on beef stored under vacuum packaging: Insight into physicochemical and microbiological quality

A novel multiphase and multicomponent model for simulating molecular diffusion in shale oil reservoirs with complex fracture networks

Molecular diffusion is critical for enhanced oil recovery (EOR) in shale oil reservoirs with complex fracture networks. Understanding the influence of fractures on diffusive mass transfer is crucial for predicting oil recovery and remaining oil distribution. Diffusive mass transfer between fractures and matrix is critical in comprehensively and effectively simulating molecular diffusion. Resolution of matrix cells significantly affects diffusion accuracy at the fracture–matrix interface. Low resolution results in multiple fractures in the same matrix cell, leading to decreased precision in calculating mass transfer by conventional methods. To address this, a novel multiphase and multicomponent model is proposed. The new model integrating the consideration of fracture spacing modifies molecular diffusion transmissibility between fracture and matrix in an embedded discrete fracture model. The discretization employs the two-point flux approximation in the finite-volume method. Validation compares the coarser mesh to the finest grid as a reliable reference. Results show the proposed model accurately captures diffusive mass transfer in a coarser mesh. Modified models study molecular diffusion's effects on EOR in shale oil reservoirs with complex fracture networks by CO2 huff and puff. Results indicate that increasing injection rates cannot improve oil recovery under extremely low porosity and permeability. Molecular diffusion facilitates CO2 penetration into the formation. This expands the swept CO2 volume and increases both volume expansion and formation energy. In addition, the light and heavy components of the crude oil are diffused into the fractures and eventually produced, which reduces gas production in the case of diffusion.

Preparation of films based on reticulated fish gelatin containing garlic essential oil

Agro-industrial co-products, such as fish gelatin, stand out for their capacity in forming biopolymeric films, being biocompatible and non-toxic; however, its hydrophilicity poses a challenge. Essential oils, rich in bioactives, attract research interest aiming to enhance the protective barrier of films and enable their application in packaging. This study produced films based on cross-linked Nile tilapia skin gelatin, incorporating garlic essential oil. Gelatin obtained through partial collagen hydrolysis from the fish skin and cross-linked with gallic acid had hydroxyproline content of 10.02 g 100 g−1 and gel strength of 287 g, which were consistent with other studies. Oil extraction used supercritical CO2 as a solvent and ethanol as a co-solvent, following a factorial experimental design, evaluating the extraction temperature (40 °C and 70 °C) and co-solvent ratio (1:1 and 1:3), with three central points. Extraction was successful, with higher yields on a dry basis at 70 °C (88.35 %), using a 1:1 co-solvent ratio. Films incorporated with oil exhibited lower water vapor permeability (WVP) than those with only cross-linked gelatin (1.59 (g m−1 s−1 Pa−1) 1011). The film with the most suitable tensile strength (19.07 MPa), elongation (120.91 %), and WVP (1.09 (g m−1 s−1 Pa−1) 1011) properties contained garlic oil extracted at the central point (55 °C and 1:2). Thermal analysis indicated increased melting temperatures in films with added oil, suggesting low thermal degradation. These results suggest that garlic oil addition can improve the properties of fish gelatin-based films, making them promising for biodegradable packaging.

Oleate Epoxides Derived from Palm Oil as New Anticancer Agents: Synthesis, Cytotoxicity Evaluation, and Molecular Docking Studies Against FASN Protein

AbstractPalm oil contains an abundant concentration of oleic acid which is known to have low toxicity to human health. The unsaturated double‐bond structure in oleic acid can be modified to synthesize oleate epoxides. The potential benefit of epoxide derivatives is their high biological activity that can be directed as new anticancer agents. In this work, the synthesis of epoxides from purified fatty acid methyl ester (EPFAME) and epoxides from purified fatty acid ethyl ester (EPFAEE) from palm oil in addition to cytotoxicity evaluations as new anticancer agents were investigated by in vitro and in silico studies. Both EPFAME and EPFAEE derivatives were successfully obtained in 82.80 % and 85.80 % yield, respectively. The MTT assay results revealed that EPFAME and EPFAEE significantly decreased the cell viability of WiDr cancer cells with IC50 of 2.70 and 14.23 μg/mL, respectively. They also showed moderate potency against T47D and HeLa cancer cell lines with IC50≥20 μg/mL. The results suggested that the addition of a methylene group from EPFAME to EPFAEE lowers cytotoxicity. A molecular docking study revealed that EPFAME and EPFAEE bind to the fatty acid synthase (FASN) protein interacting with high stability. This is represented by the binding affinity values of EPFAME and EPFAEE to FASN protein which are −7.3 and −8.1 kcal/mol, respectively. Using epoxide compounds derived from palm oil, fatty acid esters were shown to have potential medical benefits due to their low cytotoxicity and anticancer agency against several cell lines by inhibiting proliferation and inducing apoptosis of cancer cells.

Screening of Essential Oils for the Inhibition of Enterobacter ludwigii Isolated from Tomato Fruits

Tomato is perishable and requires preservation to extend its shelf life. In this study, we conducted selection processes to identify essential oils that can help to avoid spoilage and deterioration during tomato storage and extend the shelf life. Thereafter, we determined the phosphatase activity assay, potassium ion concentration, and electron microscopy to study the antibacterial mechanism of essential oil. We found that Enterobacter ludwigii W01 was the dominant spoilage bacterium in tomatoes with cracked and curled skin. We selected oregano essential oil from 12 essential oils (oregano essential oil, lemon essential oil, osmanthus essential oil, cypress wood essential oil, tea tree essential oil, licorice essential oil, Baili essential oil, white camphor essential oil, Shancang seed essential oil, rosemary essential oil, rose essential oil, and cinnamon essential oil) which could significantly inhibit the activity of E. ludwigii W01. However, the diameter of the inhibition zone for Wh, Te, Cy, Li, Rm, Le, and Os is 0 mm, the diameter of the inhibition zone for Ba, Sh, and Ro was less than 1.0 mm, whereas the diameter of the inhibition zone for Ci and Or was greater than 2.0 mm. The diameter of the suppression circle for Ci and Or was greater than 2.0 mm, while Ci was lesser than Or. Oregano essential oil can damage the cell wall of E. ludwigii W01, leading to the leakage of the alkaline phosphatase stored between the cell wall and the cell membrane which can increase the alkaline phosphatase activity in the bacterial solution. Meanwhile, the addition of oregano essential oil significantly altered the cellular morphology of E. ludwigii W01. Spraying the surface of fresh tomato fruits with 1 MIC (0.125%) of oregano essential oil prolonged the storage time to 15 days, without significant changes in its sensory attributes. Those results indicated that oregano essential oil was a potential preservative for tomatoes.

Effect of Soybean Oil on the Improvement of the Functionality of Edible Membrane-Type Food Packaging Films Based on Caseinate–Carboxymethyl Chitosan Compositions

Edible film biopolymers are gaining attention to tackle problems of plastic waste and food safety to alleviate environmental problems associated with plastic products in food packaging. In this study, caseinate–carboxymethyl chitosan (CA–CMCH) composite films were made with the incorporation of soybean oil (SO) using a casting technique. The influence of different soybean oil concentrations at 0, 0.5, and 1% (w/w) on physical, mechanical, barrier, and surface characteristics of films composed of caseinate–carboxymethyl chitosan (CA–CMCH) was evaluated. The brightest film (L* value of 95.95 ± 0.30) was obtained with the edible film made from the control group of samples with sodium caseinate (NaCA-100; 100% NaCA). The results also indicated that samples with 1% SO in NaCA-75 and CaCA-75 had lower water vapor permeability (WVP), while those with NaCA-50 and CaCA-50 showed higher values of WVP. For mechanical properties, this study found that incorporating soybean oil into the caseinate–carboxymethyl (CA–CMCH) composite films led to an enhancement of both tensile strength and elongation at break. The morphological structures, determined using SEM, of control and composite films showed compact and homogenous surfaces. Overall, the addition of soybean oil contributed to the improvement of the functional properties of the edible films, offering potential solutions to the environmental issues associated with plastic packaging and enhancing the safety and performance of food packaging.

The effects of Juniperi fructus essential oil and vacuum packing on the shelf life of rainbow trout fillets during storage at 2±1°C.

We hypothesized that the combined effect of vacuum packaging and Juniperi fructus essential oil addition would increase shelf life. Six different treatments were tested. The effects of the different concentrations of J. fructus essential oil (0%, 0.3% and 0.6%) and packing method (non-vacuum and vacuum) on the fish (Oncorhynchus mykiss) fillets of stored 4±1 °C were investigated in terms of its microbiological (mesophilic aerobic bacteria and yeast-mold), chemical (pH, total volatile alkaline nitrogen (TVB-N), thiobarbituric acid (TBA value)) and sensory quality. The results showed that J. fructus essential oil had a positive significant effect on quality parameters (p<0.05). In conclusion, based primarily on sensory, TVB-N and mesophilic bacteria data the shelf-life of fresh rainbow trout was 4 days (non-vacuum packaged), 13 days (vacuum packaged), 19 and 28 days treated with J. fructus oil (0.3 and 0.6%, v/w) under vacuum packaged, respectively. J. fructus essential oil application and vacuum packaging; extended the shelf life of fish fillets by an average of 15 days. The combined use of J. fructus essential oil and packaging techniques could form the basis for new studies.

Investigation of the processes of additional oil displacement by nanosuspension silicon oxide from a model core

The use of nanosuspensions during reservoir flooding is an alternative to chemical methods for enhancing oil recovery. In this work, the effectiveness of using nanosuspensions as a post-displacement agent after the base agent (water) was shown. Filtration tests for additional oil displacement from model rock samples were carried out. Suspensions of nanoparticles were used for post-displacement. The mass concentration of spherical silicon oxide nanoparticles (SiO2) varied from 0.01 to 0.25%wt, and their size varied from 10 to 35 nm. The permeability of the model core was 50 mD. An experimental measurement of the interfacial tension and the contact angle of wettability was performed. It is shown that with an increase in the concentration of nanoparticles, the interfacial tension of the “oil — suspension” decreases. It has been established that at a fixed concentration of nanoparticles (0.1%), with an increase in the size of nanoparticles, the interfacial tension decreases. It was revealed that when using suspensions, the contact angle of rock wetting with oil changes significantly. As a result of filtration tests, dependences of the oil displacement efficiency on the concentration and size of nanoparticles were obtained. It has been shown that additional volume of oil can be recovered after filtering nanosuspensions.

Effects of the extrusion conditions, the addition of oil and the food matrix on the physical and sensory characteristics of pre-extrusion flavored products

Effects of the extrusion conditions, the addition of oil and the food matrix on the physical and sensory characteristics of pre-extrusion flavored products

Tribofilm Formation of Zinc Dialkyldithiophosphate as Oil Additives Impregnated in Porous Polyimide under Different Contacts.

To improve the tribological properties of porous polyimide (PPI), ZDDP-mixed PAO4 was impregnated in PPI (denoted as ZPPI), and the tribological properties of ZPPI under single- and double-contacts were investigated. In the single-contact of ZPPI-steel, a rough and thick tribofilm was formed on the steel ball, which could protect the steel surface but resulted in large fluctuations in the friction coefficient. In the double-contact of ZPPI-steel-steel, ZDDP formed a uniform and thinner tribofilm on steel surfaces, leading to a lower friction. ZDDP could inhibit the formation of iron oxides significantly in the double-contact, while the antioxidant effect of ZDDP in the single-contact of ZPPI-steel was not obvious. ZnS and ZnO generated from ZDDP were adsorbed in the ZPPI pores, which aggravated the blackening of the ZPPI worn surface.

Tribological characteristics and mechanisms of boronitrogenated methyl epoxyoleate as bio‐based additive in petroleum lubricant

In this work, boronitrogenated methyl epoxyoleate (BNMEO) was prepared by boronization and nitrogenation of methyl epoxyoleate (MEO). The tribological properties of BNMEO and MEO as bio‐based lubricating additives in a petroleum oil were determined on a four‐ball tribometer. The topographies, element compositions, and tribochemical species of the worn surfaces were analyzed by a scanning electron microscope, an energy dispersive X‐ray spectrometer, and an X‐ray photoelectron spectroscope, respectively. Results showed that both BNMEO and MEO, especially the former, were excellent in fortifying load‐carrying capacities and friction‐reducing and antiwear abilities of the oil under mild loads. However, their abilities in improving extreme pressure property of the oil under severe loads were very limited. The prominent ability of BNMEO in reducing friction and wear was characterized by well‐increased maximum nonseizure loads and decreased wear scar diameters and friction coefficients and was attributed to generation of a dense and robust boundary lubrication film which consisted of a matrix of BNMEO with inclusions of aminic compounds, boron oxide, iron oxide, and hydrocarbons, thanks to strong adsorptions and tribo‐oxidations of BNMEO on the metallic surfaces in the tribological processes.